Culligan Iron-Cleer Plus Скачать руководство пользователя страница 22

Страница: 22 / 60

Programming

Power Loss

The AccuSoft

circuit board is equipped with a Hi-Cap Capacitor and EEPROM memory chip.

The capacitor is capable of maintaining the time, for at least one day, in the event of a power

outage. The EEPROM ensures that the individual programming parameters of your softener are

not lost.
If the power outage lasts long enough to drain the Hi-Cap Capacitor, the control will flash “12:00

PM” when power is returned to the control. The unit will continue to keep time from the moment

power is restored, and will initiate a full regeneration at the preset regeneration time. The time of

day will need to be reset in order to return the regeneration to its preset time.
If you live in an area where power outages occur with a regular frequency, a battery backup

option is available for ensuring that the time of day is properly maintained. Contact your Culligan

Dealer for more information.

Display

Back lit LCD display.

Program Key Depress to enter and move through the programming steps.

Regeneration

Key

Press and hold the key for three (3) seconds to initiate an immediate

regeneration.
When pressed during programming the time of day, this key will allow the user

to toggle between the hours and minutes setting of timing program segments.

Information

Key

Each time depressed, the Information key will display statistical information such

a flow rate, time of day. Use with the Toggle Down key to display other statistical

information.

Toggle Down

Key

In the programming mode this key will move the user through the programming

function in a descending mode. If depressed for greater than three seconds, the

rate at which the display scrolls through data will increase.

Toggle Up

Key

In the programming mode this key will move the user through the programming

function in an ascending mode. If depressed for greater than three seconds, the

rate at which the display scrolls through the data will increase.
This key will also allow the user to manually step through the cycles of

regeneration.

Program

Regen

Information

Setting Time Of Day

1. Press Information until 'tod' is displayed.

2. Use arrow keys to adjust minutes.

3. Press Regen once then adjust hours.

4. C ontinue to press Information to exit menu & save.

Press Regen once to begin regeneration tonight,

Or hold for immediate regeneration.

Display

Program Key

Regeneration Key

Information Key

Toggle Up

Toggle Down

Содержание Iron-Cleer Plus





























































Результаты поиска

Содержание Iron-Cleer Plus

Отзывы:

Похожие инструкции для Iron-Cleer Plus

Бренды по названию

Популярные бренды

Culligan Iron-Cleer Plus, Руководство пользователя

Результаты поиска

Содержание Iron-Cleer Plus

Отзывы:

Похожие инструкции для Iron-Cleer Plus

Бренды по названию

Популярные бренды