manualshive.com logo in svg

Culligan HE Twin Water Softener, Руководство пользователя

Поделиться
Скачать
Culligan HE Twin Water Softener Скачать руководство пользователя страница 13

9

01023052

Installation

NOTE 

Read this section entirely before starting the installation. Follow all applicable 

plumbing and electrical codes.

Component Description

The water conditioner is shipped from the factory in a minimum of five cartons.  With the exception of 

media containers, remove all components from their cartons and inspect them before starting installation.

Control Valve Assembly
Includes the control valve, bypass valve, and meter. Small parts packages will contain additional installa-

tion hardware, and the conditioner Owner’s Guide.

Media Tank
Includes Quadra-Hull™ media tank complete with Cullex

®

 ion exchange resin, underbedding and outlet 

manifold (12” and 14” tanks are shipped without media). 

Salt Storage Tank Assembly
Includes salt storage container with support plate and Dubl-Safe™ brine refill valve and chamber.

Tools and Materials

The following tools and supplies will be needed, depending on installation method.

NOTE 

Check and comply with your state and local codes. You must follow these 

guidelines. 

 

For installations in Massachusetts, Massachusetts Plumbing Code 248 CMR 

shall be adhered to. Consult your licensed plumber for installation of this 

system. This system and its installation must comply with state and local 

regulations. The use of saddle valves is not permitted.

All Installations

•  Safety glasses
•  Phillips screwdrivers, small and medium tip.
•  Gauge assembly (PN 00304450 or equivalent)
•  Silicone lubricant (PN 00471507 or equivalent)—Do Not Use Petroleum-Based Lubricants
•  A bucket, preferably light-colored
•  Towels

Special Tools

•  Torch, solder and flux for sweat copper connections
•  Use only lead-free solder and flux for all sweat-solder connections as required by state and federal 

codes.

•  Threading tools, pipe wrenches and thread sealer for threaded connections.
•  Saw, solvent and cement for plastic pipe connections.

Содержание HE Twin Water Softener





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды