background image

 

14 

Care and Cleaning                                                                             

 

What? 

 

How? 

 

Important!

 

Everyday soiling on 
glass (fingerprints, 
marks, stains left by 
food or non-sugary 
spillovers on the glass) 

1. Switch the power to the cooktop off. 
2. Apply a cooktop cleaner while the 

glass is still warm (but not hot!) 

3. Rinse and wipe dry with a clean 

cloth or paper towel. 

4. Switch the power to the cooktop 

back on. 

• When the power to the cooktop is 

switched off, there will be no ‘hot 
surface’ indication but the cooking 
zone may still be hot! Take extreme 
care. 

• Heavy-duty scourers, some nylon 

scourers and harsh/abrasive cleaning 
agents may scratch the glass. Always 
read the label to check if your cleaner 
or scourer is suitable. 

• Never leave cleaning residue on the 

cooktop: the glass may become 
stained. 

Boilovers, melts, and 
hot sugary spills on 
the glass 
 

Remove these immediately with a fish 
slice, palette knife or razor blade 
scraper suitable for ceramic glass 
cooktops, but beware of hot cooking 
zone surfaces: 
1. Switch the power to the cooktop off 

at the wall. 

2. Hold the blade or utensil at a 30° 

angle and scrape the soiling or spill 
to a cool area of the cooktop. 

3. Clean the soiling or spill up with a 

dish cloth or paper towel. 

4. Follow steps 2 to 4 for ‘Everyday 

soiling on glass’ above. 

• Remove stains left by melts and 

sugary food or spillovers as soon 
as possible. If left to cool on the 
glass, they may be difficult to 
remove or even permanently 
damage the glass surface. 

• Cut hazard: when the safety cover 

is retracted, the blade in a scraper 
is razor-sharp. Use with extreme 
care and always store safely and 
out of reach of children.

 

Spillovers on the 
touch controls 

1. Switch the power to the cooktop off. 
2. Soak up the spill 
3. Wipe the touch control area with a 

clean damp sponge or cloth. 

4. Wipe the area completely dry 

with a paper towel. 

5. Switch the power to the cooktop 

back on. 

• The cooktop may beep and turn 

itself off, and the touch controls 
may not function while there is 
liquid on them. Make sure you wipe 
the touch control area dry before 
turning the cooktop back on.

 

 

 

 

 

 

Содержание UBKCIND60BV

























Отзывы: