25
INSTALLATION
The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o
UK Regulations and Safety Standards
or their European
Norm Replacements.
o
Building Regulations
(issued by the Department of the
Environment).
o
Building Standards
(issued by the Scottish Development
Department).
o
IEE Wiring Regulations.
o
Electricity At Work Regulations.
Electrical connection
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o
This appliance should be wired into a 13A double pole switched
fused spur outlet, having 3 mm contact separation and placed in an
easily accessible position adjacent to the appliance. The spur outlet
must still be accessible even when your oven is located in its
housing.
o
To connect the oven power cord, remove
the cover on the terminal block, in order
to gain access to the contacts inside.
Make the connection, securing the cord in
place with the cable clamp provided and
then immediately close the terminal block
cover again.
Содержание UBEMF73
Страница 34: ...32 IM UBEMF73 20180510...
