Cuizimate RBSRC18JA, Инструкция по эксплуатации

Страница: 16 / 20

The water holder can be taken out inclined upward when it is opened
to position shown as the right figure. Note you should be slow to take
the water holder out can prevent water spill out.
After washing it, the water holder should be replaced inclined
downward into the seat of water case.
After placing the water holder in the seat of water holder correctly,
you should put it toward with thumb till learning of the sound of
“Click”. 2.
3.
4.
Precautions: The placement of water holder could be felt with
tightness at the beginning, but it will be easily after 3-5 times.
1. If there is foreign matter in component of steam valve, it should be removed
timely in order to keep the effect of preventing spill over and coking rice.
2. When washing the component of steam valve, please do not pull and
push the seal ring of steam valve at discretion.
Shown as figure, it can be disassembled after rotating it rightward
and leftward when pulling it up.
If the above method is difficult to disassemble, the method of lightly
pushing the steam valve out with handle can be adopted and the
concrete steps should refer to figure.
The part assembly can be divided by rotating it along with direction of
“open” shown as the arrowhead and pull it forward.
Make the triangle mark
(Δ)
on seat of steam valve pointed to the
position of triangle mark
(Δ)
on cover of steam valve.
Rotate it along the direction of arrowhead “Close” till learning the
sound of “Click”.
Insert it correctly in the hole of steam valve and guarantee the position
of seal ring in steam valve exactly before placing steam valve (the
edge should be placed into groove, that is the edge of steam valve
pointed to the handle).
1.
2.
3.
1.
2.
3.
STEAM VALVE
Disassembling Method:
Method of Installation:
-15-