Cuizimate RBSDISHWASHER, Инструкция по эксплуатации

Страница: 22 / 25

-21-
Always unplug the power cord from the socket before cleaning and maintaining the dishwasher.
Clean filter net : After each washing, the filter net should be taken out and the residue should
be poured.
It is recommended that you should clean machine once every 15 days, and put 10 grams of
citric acid in the groove of washing bowl powder before turning on the “self-clean” function.
If the internal hose assembly needs to be replaced, it must be replaced by a professional,and
the new hose assembly should be used.The old hose assembly cannot be made repeatedly.
If the power cord is damaged, it must be replaced by a professional of the manufacturer’
smaintenance department or similar department in order to avoid danger.
WARNING: The above fault detection and treatment methods are only provided to professional
personnel for maintenance guidance. Users are not allowed to dismantle the machine for
inspection and maintenance without authorization.
•
•
•
•
•
MAINTENANCE & CLEANING
MAINTENANCE AND REPAIR
ERROR
CODE
MALFUNCTION TROUBLE SHOOTING
Er01
Er03
Er04
Er05
Er06
Er02
Main temperature sensor
open circuit.
Auxiliary temperature sensor
open circuit.
Auxiliary temperature sensor
short circuit.
communication failure.
The water level sensor did not
detect that the water tank was
full within 6 minutes of opening
the inlet valve.
Main temperature sensor short
circuit.
Check the pin of main temperature sensor
if it is loose.
Check main temperature sensor’swire if it
is damage or broken.
Check the pin of main temperature sensor
if it is loose.
Check main temperature sensor’swire if it
is damage or broken.
Check the line of the display board and
whether the solder end is imaginary.
Check the cable plug is loose.
Check to see if the faucet is open or fully open
Check the faucet for water
Check whether the sensing pin of the liquid
level sensor is loose.
Check whether the sensor end of the liquid
level is loose.
Unplug the power plug and plug it in again,
then reboot.
Change the new temperature sensor.
Change the new temperature sensor.
1.
2.
1.
2.
1.
2.
1.
2.
3.
4.
5.