6
TIPS
1.
Blender is
not intended
for blending hot liquids.
2.
Blender is
not intended
for blending frozen solid ingredients. Chop ingredients into
smaller size chunks before freezing. Allow ingredients to defrost slightly before blending.
Large frozen solid ingredients may damage Cups/Jar. Use crushed ice instead of ice cubes.
3.
When chopping meat or other food, use pulse mode. It is best to do in batches, making
sure not to overfill Cup/Jar. If food gets stuck to the side, take Cup/Jar attachment out and
tap on exterior surface of Cup/Jar with your hands to dislodge food from the inside wall of
the Cup/Jar. Put Cup/Jar back in place over Base and continue Pulse until desired result.
4.
For liquid ingredients,
DO NOT
fill Cup/Jar more than ¾ capacity. Overfilling Cups/Jar could
result in spillage and cause permanent damage/malfunction to motor. Spillage into motor
will void warranty and could cause motor to overheat and risk of fire or personal injury.
Your Personal Drink Blender is not only a great drink blender but can also Mix - Chop - Grate -
Grind - Purée & Whip.
Use Cross Blade (Double Blade)
for
Blending - Mixing - Chopping - Grating. Use preferably for
wet ingredients.
Use Flat Blade (Low Blade)
for Whipping & Grinding. Use preferably for dry ingredients.
Grate Cheese - Chop Nuts - Chop Meat & Vegetables for Salads - Purée fruits - Whip Cream - Mix
Sauces - Blend Fresh Baby Food - Mix Salad Dressing & Dips - Grind Bread Crumbs - Mix Eggs
Ingredients for Scrambled Eggs & Omelets - & Much, Much More...
CARE & MAINTENANCE
WARNING
: To avoid risks of electrical shock, burns or injuries, always make sure the product is
unplugged from the electrical outlet before displacing, servicing or cleaning it.
CAUTION
: Exposed sharp metal blades ! Use
EXTREME CAUTION
when handling and cleaning
metal blades.
1.
Always clean Cups/Jar & Blades Attachment after every use.
2.
Wash all parts except Base/Motor in warm, soapy water, making sure to clean all residual
food from under the blades (Use a toothbrush or small brush if needed). Rinse & dry
thoroughly. Alternately, mix ½ tsp of liquid soap in Cup/Jar with warm water up to 2/3 full.
Screw Blade. Attachment to be cleaned in place and run Blender for 1 minute. Empty
contents, rinse and dry thoroughly.
3.
DO NOT
wash any parts in dishwasher.
4.
Clean the Base by wiping it with a damp cloth. To avoid damage to appliance and risk of
electrical shock or injury,
DO NOT immerse in or expose Base/Motor, electrical cord or
plug to water or other liquid. DO NOT
place Base/Motor in dishwasher.
5.
Do not use abrasive cleaners or scouring pads to clean any parts of the Blender, Cups/Jars
or Blades.
6.
Unplug power cord from outlet when not in use. Reassemble & cover Blender before
storing it in a cool dry place if not being used for an extended period of time.
