Cuisinart WAF-F40 Series, Инструкция и книга рецептов

Страница: 5 / 24

BEFORE FIRST USE
Remove all packing and any promotional labels
or stickers from your waffle maker. Be sure that
all parts (listed in Part and Features) of your
new waffle maker have been included before
discarding any pack materials. You may want
to keep the box and packing materials for use
at a later date.
Before using your Cuisinart
®
Double Belgian
Waffle Maker for the first time, remove any
dust from shipping by wiping the plates with
a damp cloth.
NOTE: The waffle plates have been treated with
a special nonstick coating. The first time you use
your waffle maker, it may have a slight odor and
may smoke a bit. This is normal and common to
appliances with a nonstick surface.
OPERATING
INSTRUCTIONS
MAKING ONE WAFFLE
1. Place the Double Belgian Waffle Maker
on a clean, flat surface.
2. Plug cord into 120V AC outlet.
3. Adjust Browning Control Slider to a
desired setting. Your Cuisinart ® Double
Belgian Waffle Maker will now begin
preheating.
4. Once preheated, the indicator lights will
be illuminated and the waffle maker will
beep 6 times.
5. After waffle maker is preheated, brush
the waffle plates with a flavorless oil to
thoroughly coat all surfaces. It’s important
that you preheat the waffle maker before
seasoning with oil. Your waffle maker is
now ready to bake.
IMPORTANT NOTICE!
TO FACILITATE OPENING AND CLOSING
THE DOUBLE WAFFLE MAKER, PLEASE
NOTE THE FOLLOWING INSTRUCTIONS.
TO OPEN:
Place thumb on top of lip of lower handle,
and index finger under lip of upper handle.
Push open.
TO CLOSE:
Place thumb on top handle, and fingers
under bottom handle and pull together
until shut.
NOTE: Please note that top and bottom
grid covers may separate slightly during
use. This is normal. Should this occur,
do not close handles to rotate until unit
beeps, indicating that the baking cycle is
completed. To reduce grid separation and
overflow during cooking, you may want to
reduce the quantity of batter.
6. After the waffle maker is preheated
and ready for baking, open the waffle
maker lid. Pour waffle batter evenly on
the waffle grid. Use a heatproof spatula
to spread the batter evenly over the plate.
7. Close top cover and rotate the waffle
maker plates 180º.
8. When the waffle is baked to the desired
doneness, the unit will beep three times
and the indicator light will illuminate.
9. Rotate waffle grid with the lit indicator
light to the top position. Raise top cover
and remove the baked waffle with a
heatproof spatula.
10. Repeat for additional waffles.
MAKING TWO WAFFLES
AT ONE TIME
1. Raise top cover and pour waffle batter
evenly on the waffle grid. Use a heatproof
spatula to spread the batter evenly over
the plate.
2. Close top cover and rotate the waffle
grid 180°. The green ready light will turn
off until waffle has completed baking.
3. Raise the cover that is now on top
and pour waffle batter evenly on the
waffle plate. Use a heatproof spatula
to spread the batter evenly over the plate.
Close the cover and rotate the waffle
maker plates 180°.
4. When one of the waffles is done, the unit
will beep three times and the indicator
light located on the waffle maker cover
will illuminate.
5. Rotate the waffle plates with the lit
indicator to the top position. Raise the
top cover and remove the baked waffle.
6. If making additional waffles, pour waffle
batter evenly on the waffle plate. Use a
heatproof spatula to spread the batter
evenly over the plate. Close top cover
and rotate the waffle maker plates 180°.
5
4
6
1