Cuisinart ViewPro CPT-3000, Инструкция пользователя

Страница: 4 / 8

4
USE AND CARE
Unwind the power cord. Check that the crumb tray and the two inner
glass panels are in place and that there is nothing in the toaster slot.
Plug power cord into the wall outlet.
NOTE: If the inner glass panels are not properly in place, the
unit will not function.
1. Insert slice(s) of bread.
Be sure that multiple slices do not overlap and that the
carriage is in the up position.
2. Set the browning control.
Slide finger to desired shade:
Setting Color
1–2 light
3–4 medium
5–6 dark
3. To begin toasting
Press the carriage lever until it locks into the down position.
4. To stop toasting
When the toasting cycle is finished, the toast will be raised. If you wish
to stop the cycle before it is finished, simply touch the Cancel icon.
Some notes on browning:
Toasting is a combination of cooking and drying of the bread.
Therefore, differences in moisture level from one bread to another
can result in varying toasting times.
• For slightly dry bread, use a lower setting than you normally would.
• For very fresh bread or whole wheat bread, use a higher setting
than normal.
• Breads with very uneven surfaces (such as English muffins) will
require a higher toast setting.
• Thickly cut pieces of bread will take longer to toast, sometimes
significantly longer, since more moisture must be evaporated from
the bread before toasting can occur. Very thick pieces may require
two cycles.
• When toasting raisin or other fruit breads, remove any loose
raisins, etc., from the surface of the bread before placing into the
toaster. This will help prevent fruit pieces from falling into the
toaster or sticking on the guide wires in the slot.
• Before toasting bagels, slice each bagel into two equal halves.
Frozen waffles, pancakes, French toast and bagels
These items should be warmed before toasting, using the Defrost
function. Select Defrost, and then your preferred browning shade.
For example, when toasting a frozen bagel, select Defrost, the
browning level, and then Bagel.
Toaster pastries
Exercise caution with toaster pastries; the filling can become quite
hot, long before the surface of the pastry becomes browned. Never
leave toaster pastries unattended while toasting or warming.
Tips
• Never force foods into the toasting slot. Foods should fit freely between
the guide wires.
• Do not place buttered breads in the toaster, as this could create a
fire hazard.
• Uneven toasting is usually due to bread slices of uneven thickness.
• After use, unplug your toaster from the electrical outlet.
Single Slice Function
The Single Slice Function evenly toasts one slice of bread, side to side.
1. Insert slice of bread.
2. Set browning control.
3. Touch the Single Slice icon. Red LED indicates feature is active.
4. Press the carriage control level until it locks into position.
To Stop Cycle
When the Single Slice cycle is complete, the toaster will raise the
bread. If you wish to stop the cycle before it is finished, simply
touch the cancel icon to interrupt.
Bagel function
The bagel feature reduces heat on one side of the toasting slot.
This toasts the cut side of the bagel slightly more than the other side.
An embossed icon (
◗
◗
) located on the top of the
toaster shows you the right way to insert your bagel.
(The cut side should always face away from the center
of the pair of toasting slots.)
1. Insert halved bagels.
2. Set browning control.
3. Touch the Bagel icon. Red LED indicates feature is activated.