Cuisinart Smart Stick CSB-77, Инструкция и книга рецептов

Страница: 12 / 32

12
CHOPPINg AND gRINDINg
Processing Food
1. Put the prep bowl firmly on a flat sturdy surface like a countertop.
Be sure the blade is assembled to use the blade edge that is
appropriate for the food to be processed.
2. Put food into the prep bowl. Be sure the food is cut into small
pieces, and the bowl is not overloaded.
3. Put the chopper/grinder cover on top of the prep bowl. Be sure
the cover is properly seated.
4. Press the ON/OFF button on the Smart Stick
®
Hand Blender.
5. Do not operate the chopper/grinder attachment for longer than
15 seconds at a time.
Note: Due to the powerful motor provided with this unit,
Cuisinart recommends using one hand to support the chop-
per/grinder during operation.
6. When you have finished processing the food, stop the machine
by taking your fingers off the ON/OFF button.
7. WHEN THE BLADE STOPS MOVING, remove the Smart Stick
®
Hand Blender motor body from the chopper/grinder cover, and
remove the cover from the chopper/grinder.
8. Unplug the unit.
9. Carefully remove the blade assembly, holding it by the gripping
ridges on the plastic sheath. NEVER TOUCH THE BLADE ITSELF.
10. Remove food with the spatula.
Note: Do not operate the Smart Stick
®
Chopper/grinder
attachment without food in the prep bowl.
CLEANINg AND MAINTENANCE
SMART STICK
®
HAND BLENDER
Always clean the Smart Stick
®
motor body and blending shaft
thoroughly after using.
Remove the blending shaft from the motor body. Clean the motor
body only with a sponge or damp cloth. Do not use abrasive cleaners
which could scratch the surface. To clean the blending shaft, wash by
hand in hot water using mild detergent. Be mindful of the permanently
mounted razor sharp edges.
Never immerse the motor body in water.
When the appliance has malfunctioned or has been dropped or
damaged in any way or is not operating properly, return the appliance
to the nearest Cuisinart Repair Center for examination, repair or
mechanical or electrical adjustment.
Any other servicing should be performed by an authorized service
representative.