6
7
ASSEMBLY
BLENDING ATTACHMENT
1. Align the motor body housing with the blending
shaft and push the pieces together until you
hear and feel them click. It may be helpful to
press the release button when assembling.
2. Plug the motor housing into a electrical outlet.
CHOPPER/GRINDER ATTACHMENT
(WITH REVERSIBLE BLADE)
1. Place the chopping/grinding blade into center
of the work bowl over metal blade shaft
(See REVERSIBLE BLADE, following).
2. Place cover on top of the work bowl. Align
notches on cover and bowl, and turn clockwise
to lock into place.
3. When ready to process food, press power
handle onto cover.
Assemble the parts.
1. Place the chopping cup on a flat, dry, stable surface.
2. The metal blade assembly shaft (A) is attached to
the bottom of the chopping cup. If not already in
place, slide the fully assembled blade assembly
(B) over the top of the metal blade assembly shaft.
2a. Put together the blade assembly if not
assembled: Very carefully connect the blade
ring (C) to the plastic blade sheath (D). Line up
the blade ring opening with the plastic sheath.
There are notches (E) on opposite sides of the interior of the
hub. These fit over ridges on the sides of the plastic blade
sheath (G). Let the blade ring slide to the
bottom of the plastic sheath. HOLD THE
BLADE RING BY THE CENTRAL HUB
HOLDING RIBS (grips) (F) ONLY. DO NOT
TOUCH THE RAZOR-SHARP BLADES.
Pick up the blade ring by its hub holding
ribs (grips) and turn it very slightly
clockwise. This locks it in place on the plastic blade sheath and
prevents it from sliding up during processing. Note these
important features of the blade ring. The blade ring can be
placed over the plastic blade sheath in two different ways: If you
hold it this way (A), you will see the word “Sharp” on the blade.
Assemble the blade this side up to use the sharp edge. If you
hold it this way (B), you will see no writing on the blade.
Assemble the blade this side up to use the blunt edge.
B.
BLUNT SIDE UP
SHARP SIDE
A.
WHISK ATTACHMENT
1. Align the motor body housing with the assembled whisk
attachment and push the gearbox and motor housing
together until you hear and feel them click. It may be
helpful to press the release button when assembling.
Note: Whisk and whisk gearbox are detachable from one
another.
POTATO MASHER ATTACHMENT
Your potato masher attachment comes fully assembled.
1. Align the gear box at the end of the potato masher
with the motor body housing and push gearbox and
housing together until you hear and feel them click.
2. Plug the motor housing into an electrical outlet.
NOTE:
Gearbox detaches from potato masher shaft
for cleaning and storage.
To reassemble potato masher after cleaning
(see Cleaning Potato Masher Attachment, pg.10)
1. Align the triangle mark on the gear box with the
unlock symbol on the potato masher shaft.
2. Rotate the gear box clockwise until you hear it click
and lock into place on the shaft.
3. Place blade onto hub at the wide end of shaft,
push down, and twist counterclockwise to secure.
NOTE: blade cannot be put on or taken off unless
gear box is firmly attached to the shaft.
B
A
C
D
G
F
E
