Cuisinart SG6BU, Руководство пользователя

Страница: 13 / 20

13
SHORT RUN TIMES
If, after repeated use, the run time seems to get shorter and the
Seasoning Mill has less power, remove the plug from the wall
outlet and continue to use mill until it is fully discharged and stops
operating. Plug base back into wall outlet and recharge the unit
for 12 hours or overnight for a full new charge. This procedure
improves battery capacity and should be repeated once every 2– 3
months to ensure optimum performance.
Cleaning & Maintenance
The appliance is safe to be left plugged into the electrical supply
when not in use to ensure the batteries are always charged.
However, the product should be switched off and unplugged
before cleaning, removing or attaching the grinding containers to
refill with salt, pepper or spices, or when handling any parts that
are intended to move. It should also be unplugged if not being
used for a prolonged period of time.

Clean the mill and base by simply wiping all parts with a damp
cloth and thoroughly drying. Do not expose the appliance to
moisture.

Do not use detergents to clean it.

To clean the grinding chambers, simply unlock the container,
remove and wash with warm soapy water. Dry thoroughly and
replace.

To clear a peppercorn that is stuck in the grinding wheel you
may either:
✓ ✓
Turn the mill upside down and shake gently while pressing the
On/Off power button.
✓ ✓
Turn the mill upside down and position the grind selector to
coarse, then hold over a plate and grind until peppercorn is
dislodged.

Never use moist or wet spices in the mill. This will clog the
grinding mechanism. We recommend using only store-bought
dried spices.

N.B Never immerse the full appliance in water, any other
liquid or place in a dishwasher. ✓