Cuisinart KUA-17, Инструкция пользователя

Страница: 6 / 9

OPERATING
INSTRUCTIONS
BEFORE USING FOR THE
FIRST TIME
Before using your Cuisinart
®
Cordless Automatic
Electric Kettle for the first time, you should
operate the kettle 2 or 3 times following the
instructions below. This will remove any dust
or residues remaining from the manufacturing
process.
BOILING WATER
1. Remove the Lid.
Place the kettle with the spout facing away from
you. Gently lift off the lid.
2. Fill the Kettle.
Fill the kettle with as much fresh, cold water as you
will need. The maximum water level is indicated
inside the kettle and is marked by the word “MAX”.
The maximum amount of water to be used is
indicated by the “MAX FILL” level in figure 2 below.
3. Close the Lid.
Position kettle with spout facing away from you.
Replace lid on kettle.
4. Place Kettle on Power Base
Place the kettle on the power base so the element
on the bottom of the kettle sits securely on the
power base.
5. Power “ON”.
Depress the power “ON” switch by gently
pushing down until a “click” is heard (See Fig. 3.)
When the water has boiled, the kettle will
automatically switch “OFF”.
NOTE: The kettle can be switched off at any time
before the water boils simply by lifting the kettle
off the base.
6. Pour and Serve.
Pour water out slowly. Return kettle to base after
pouring. If you wish to reboil the water, you must
depress the power “ON” button again.
HELPFUL HINTS
Always use fresh, cold water for each boiling.
If the kettle is accidentally switched “ON” without
a sufficient water level, a boil-dry mechanism will
automatically switch the kettle “OFF”.
Empty kettle after each use. Do not leave water
standing in the kettle.
NOTE: For your safety, it is recommended that the
lid be placed securely on the kettle whenever kettle
is in use.
Figure 2
Figure 3
4