Cuisinart KE7451U, Руководство пользователя

Страница: 8 / 14

Instructions for Use
Before using for the first time we recommend operating the kettle 2 or 3 times. Fill to the MAX. marked
fill level, bring to the boil and when boiling has finished and the kettle has switched off, discard the water
and rinse out the inside. This will remove any dust or residue remaining from its manufacture.
ß Open the lid by pressing the lid release button, located on the top of the handle.
ß Fill the kettle with the required amount of cold water, the water gauge is at the rear of the kettle and is
marked with min and max, please take care not to exceed the max mark as this may cause spitting from
the spout when boiling.
ß Ensure the lid is closed and locked in position; you will feel and hear a slight click.
ß Align the kettle over the powerbase and gently lower it in to position, it will find its own way and sit
firmly on the base.
ß Switch the kettle on by pressing down the power switch at the rear of the kettle, you will hear a slight
click and the switch will illuminate with a blue LED.
ß The kettle will switch off automatically when it has completed the boil, however the kettle can be
switched off at any time by simply lifting the power switch in an upwardly direction, the LED will switch
off and the same click will be heard as switching on.
ß
Carefully lift the kettle off the powerbase and pour the water, please note if the kettle is removed from
the powerbase before it’s automatically switched off, it will carry on to boil when it’s replaced on the
powerbase.
NB: A couple of water droplets or condensation may appear on the powerbase, this is quite normal and
not a leak.
NB: Do not open the lid of the kettle when pouring, escaping steam may scald.
ß Once the kettle is re-located on the powerbase it can be switched on again at any time, if the switch will
not stay down it means the control is still a little warm, this is normal and it will simply re-set itself in a
few seconds when cooled and will be ready to boil again.