Cuisinart ICE-100XA Series, Инструкция/Рецепты

Страница: 6 / 6

6
TROUBLESHOOTING
PROBLEM SOLUTION
Screen displays
“EEEE”, continuous
beeping and the unit
is stopped.
Power off and unplug the unit.
Contact Customer Service at 1800 808 971
(AUST), 0800 435 000 (NZ).
Unit turns off sooner
than the time set
The ice cream could be done. The overload
protection feature will turn the unit off.
If not the reason above, unplug the unit. Let
it rest for 2 hours. Power unit on and being
making your ice cream or gelato.
At any time during
the mixing/cooling
cycle, the unit beeps
continuously for 30
seconds.
Power off and unplug the unit. Let it rest for
2 hours. Power unit on and being making
your ice cream or gelato. If this happens
again, let the unit rest for 24 hours. If unit
continues to beep after you have tried the
above procedure, contact Customer Service
at 1800 808 971 (AUST), 0800 435 000 (NZ).
Mixing bowl is
difficult to lift
Wait 2 minutes and lift the mixing bowl.
Make sure mixing bowl and the base are dry
before making ice cream.
Paddle slippage after
several batches of
ice cream
Watch for condensation on base of bowl.
Clear off water or ice from mixing bowl and
base.
Make sure mixing bowl and base are dry and
clean before making next batch of ice cream.
IB-13/253-B
©2019 Cuisinart
Suite 101 Ground Floor
18 Rodborough Rd
Frenchs Forest NSW, 2086
Australia
Visit our Website:
www.cuisinart.com.au
Printed in China
Any other trademarks or service marks of third parties referred to
herein are the trademarks or service marks of their respective owners.