5
down on the tab, and gently pull out the
cup to dispose of its contents (see figure I).
Clean cup and replace in base. (See
Cleaning and Care, page 6.)
5. Thoroughly clean grill/griddle plate. (See
Cleaning and Care.)
6. Flip the plate over, and return to base.
7. Make sure that drip hole in plate lines up over drip cup (see figure J).
8. Reconnect the plug into a standard electrical outlet.
Using the kebab feature
1. Assemble the unit with the grill/griddle plate
and drip cup in proper position. Slide out
kebab drawers, place the drip trays in the
kebab drawers, and slide drawers into
place (see figure K). Turn the temperature
control dial to desired temperature and
preheat for approximately 10 to 12 minutes.
2. Prepare your food according to your
favorite recipe and slide food onto each of
the skewers (see figure L).
3. Place skewers into the skewer slots so that
the star-like shape at the handle ends of the
skewers is inserted into the gear slots in the
front end of the kebab drawer (see figures
M, N). Slide drawer
back into place.
Note:
When using
large cubes of meat
or seafood, you may
only cook up to six
skewers at a time.
4. Once all the skewers
are in position, press the kebab control switch to the On position
to start the kebabs rotating. The switch
light will illuminate to let you know the
kebabs are rotating (see figure O).
5. To check if your kebabs are cooked, press
the kebab control switch to stop them from
rotating and use a pot holder to remove
one of the kebabs. If more time is needed,
replace the skewer and press the kebab
control switch.
Using the hot dog feature
1. Assemble the unit with the grill/griddle plate and drip cup in proper
position. Slide kebab drawers out, place the drip trays in the
kebab drawers and slide drawers into place. Turn the temperature
control dial to desired temperature and preheat for approximately
10 to 12 minutes.
2. Assemble the hot dog rollers by slipping the
kebab skewers through the holes in each
end of the hot dog roller caps (see figure P).
3. Place the skewer with hot dog roller into
the skewer slot so that the star-like shape
at the handle end of the skewer is inserted
into the gear slot in the front end of the
kebab drawer. (see figures Q, R).
4. Using tongs,
position the hot
dogs in between
two of the hot dog
rollers. Four hot
dogs will fit on each
of the drawers. Slide
the drawer back into
place.
L.
P.
M.
Q
N.
R.
J.
K.
O.
