OpERATING THE GRIddLER
®
dELUXE (CONTINUES)
• When the plate(s) reach the SEAR temperature, the LED light around the UPPER
SEAR and/or LOWER SEAR button(s) will turn green and will flash ten times to
allow enough time to put the food on the plate(s).
• After 10 seconds, the green light will stop flashing and the upper and/or lower
plates will sear for 2 minutes.
• When the sear cycle has finished, the LED light around the UPPER SEAR and/or
LOWER SEAR button(s) will go off and the unit will adjust to the temperature(s)
selected on the corresponding temperature knobs.
• To cancel SEAR, press the SEAR button(s) again. The LED light(s) will turn off
and the unit will adjust to the temperature(s) selected on the corresponding
temperature knobs.
Cleaning and Care
Make sure the plates have cooled completely for at least 30 minutes. Use the
cleaning tool to remove any leftover food from the plates. Dispose of any grease
from the drip tray once cooled. Press the plate release buttons on the right side of
the unit to remove the plates from the housing. The plates, drip tray, and cleaning
tool can be cleaned by hand or on the top shelf of the dishwasher. The housing base
and control panel can be wiped clean with a soft, dry cloth.
STORAGE
1. Wrap the power cord
around the cord
storage clips at the
back of the base.
2. Store clean cooking
plates and drip tray in
the unit.
