DESCRIPTION OF PARTS
Your thermal carafe coffee maker brews fresh,
filtered coffee in minutes. It can also
heat
water for instant beverages. The thermal carafe
contains a vacuum glass inner liner which delivers
heat retention superior to other containers used
with drip
makers and allows the retention
of full coffee flavor.
Reservoir Cover
Carafe
Swing-Out Filter
Brew-Through Lid
I
Indicator
Pause Serve
On/Off Snitch
Platform
Cord Storage
PREPARATION FOR USE
Before first use, clean the thermal carafe
coffee maker completing a brew
as described below
using coffee
or coffee filter.
COFFEE PREPARATION
1. Place coffee maker on a solid flat surface.
Plug into
outlet.
2. Open thermal carafe lid in direction of
“OPEN” arrow. Fill thermal carafe with cold,
fresh water. Open hinged water
cover; pour water into reservoir opening.
Markings on
level indicator show
amount of water needed to make desired
number of cups of coffee.
TO AVOID
DO SOT FILL
S-CUP MARK.
Close reservoir cover.
3. Before thermal carafe is returned to platform,
prewarm carafe running warm water
through carafe. If warm water is not run
through carafe, when hot coffee flows into
carafe during brewing cycle, the glass liner
may crack due to the temperature change.
Pre-warming carafe will help keep coffee
warmer, and also prevent glass liner from
being damaged.
9.
10.
11.
Return carafe lid to
carafe. To close lid,
turn it in direction of “CLOSE”
until it
fits tightly on carafe, and
is
aligned
spout.
thermal
carafe to platform. Be certain thermal carafe
lid is in
position and is securely
in place during brew
Open
basket grasping basket
handle and
outward. Insert a filter
into filter hasket; make sure filter fits
in basket. Use a fresh filter for each
of coffee.
placing level tablespoons per cup of
ground
into cone filter, return basket to
closed position. To ensure safe operation, make
sure basket is closed securely
thermal carafe and basket securely in
place, press
button; red LED
light.
CAUTION: Coffee maker becomes
hot during brew cycle; handle
extreme
care as hot parts and escaping steam
cause burns.
The Brew-Through lid allows coffee to drip
from coffee maker through closed lid.
coffee has completely stopped dripping into
thermal carafe and aater level indicator is
empty, brew cycle is complete.
dripping
stops,
lid will seal so coffee
freshness and temperature are preserved.
An audible “beep” tone
signal when brew
cycle is complete. Coffee maker
switch
off automatically
After coffee grounds have cooled,
open filter basket and discard used coffee
and grounds. To remove filter basket from
coffee maker, (A) grasp basket handle and
basket outward, and (B) with basket in far right
position, lift up and pull basket hinge.
Brew-Through lid
coffee to be poured
with lid in “CLOSED” position so coffee
freshness and temperature can be preserved.
LID IS
IN “CLOSED” POSITIOS.
4
Содержание DTC-800 Series
Страница 1: ...Cuisina...