Cuisinart DGB-800 Series, Инструкция пользователя

Страница: 13 / 16

13
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The coffeemaker
is beeping. Filter door is not closed • Check to be sure that all components of the filter compartment are in place
• Close filter door (you will hear a click if the door is properly shut)
Filter basket is not in
place • Open filter door by pressing the filter door release button
• Hook filter basket with cover onto door
• Close filter door (you will hear a click if the door is properly shut)
Coffee grounds and filter
from previous use are
still in filter basket • Remove filter and used coffee grounds
• Add new filter
The brew cycle
will not start There is no water in the
water reservoir • Fill the water reservoir using the water level markings
Coffee is weaker
than usual There are not enough
beans in the hopper • Be sure there are enough beans in your hopper for the amount of coffee you
intend to brew
Strength setting
is incorrect • Check your strength setting — displayed on the LCD screen
• To change your strength setting, press the Strength Control button
The coffeemaker
is not grinding
beans The hopper may be
too full • Turn the coffeemaker off and unplug
• Remove some of the beans from the hopper
EMPTY
appears in LCD
display Coffee grounds and filter
from previous use are
still in filter basket • Remove filter and used coffee grounds
• Add new filter
CLEAN is flashing
on the LCD when
the unit is turned
on Coffeemaker needs to
be decalcified • Run a clean cycle – follow the decalcification directions on page 11 of
Instruction Booklet
The coffeemaker
will not enter
CLEAN mode The water reservoir is
empty • Fill the water reservoir with decalcification mixture before turning the
coffeemaker on - Follow the decalcification directions on page 11 of
Instruction Booklet