(Use 1 level scoop of whole beans per cup.
For 1 or 4 cups, use 1-1/2 level scoops per
cup. Maximum capacity is 14 level scoops.
Do not over fill or the grinder could
malfunction and/or the coffeemaker
may overflow. This is our suggested recipe.
Adjust the recipe to taste.)
3. Open Filter Door
Place a #4 basket paper filter or Cuisinart’s
®
commercial style permanent filter in
the basket.
Note: When using the Cuisinart filter, be
sure that the filter handle is facing away
from the grinder basket. If you do not do
so, the handle may interfere with the flow
of ground coffee into the filter basket.
Also note: a permanent filter may allow
some ground coffee to flow into carafe.
The filter holder will help to keep the filter
open, but when using a paper filter, be sure
that the filter is completely open while
touching the side walls and bottom of
the basket.
Place filter basket lid in place. Close filter door.
4. Close the Reservoir Lid
Press down to lock. The Grind & Brew
™
Automatic coffeemaker is equipped with a
Safety Interlock System. The Grind & Brew
™
coffeemaker will not operate if the cover of
the unit is open or the grinder cover is left out.
Because grinder blades spin during operation,
the Grind & Brew
™
coffeemaker will not
operate if the cover of the unit is open. If you
try to turn the unit on with the cover open, the
unit will beep continuously until the missing
parts are installed and you close the lid. The
unit will also beep if you open the lid during the
brewing process. The grinder will stop grinding
or, if brewing, the brewing will stop. Once the
missing parts are installed and the cover is
closed, the beeping stops. The brewing
process can be restarted by pressing the “On”
button. Restarting the process will not affect
coffee results. If you do not want the grinder to
come on again, press the “Grind Off” button
before pressing the “On” button. Once the lid
is closed, the beeping will stop, and the
grind and brew process will start again from
the beginning.
5. Before Brewing Coffee
Make sure you have replaced the glass
carafe in its position on the warming plate
and have placed a filter in the filter basket.
Plug the cord into an electrical outlet. “12:00”
will appear until you set the time. This will not
interfere with the operation of the coffeemaker.
To set clock, see the “Programming Your
Coffeemaker” section, page 8.
Check to see that the Automatic-Off Time is as
you desire. For information on these features
see “Programming Your Coffeemaker” on
page 8.
6. Power Unit
a) Immediate grinding and brewing:
Press the ON button. The indicator will
light and the process will begin.
b) Programmed Brewing:
Press the “Program” button. The indicator will
light and the display will show the programmed
time for as long as the button is depressed.
The display reverts back to time of day once
the button is released. To set the programmed
time, see “Programming Your Coffeemaker”
on page 8.
7. Select Cups Setting
The 1-4 cup setting button is used when
you make small amounts of coffee. Normal
coffeemakers will produce a colder batch of
coffee when smaller amounts are made,
because the heater doesn't have enough time
to properly ‘warm up’ to heat a small amount.
The 1-4 setting basically ‘double heats’ the
water, making your smaller amount as piping
hot as a full pot would be.
To use: When making a smaller amount,
press the 1-4 button on the control panel
after turning on the unit. The indicator light will
illuminate. Note that the 1-4 button can be set
at any time.
8. During and After Brewing
The Brew Pause
™
feature allows you to remove
the carafe from the heater during mid-brew.
The brewing process does not stop during this
period; only the flow of coffee from the basket
stops.
Do not remove the carafe for longer
10
