Cuisinart CSS-100C, Инструкция и книга рецептов

Страница: 4 / 9

6
7
Pr
oblem
Solution
The CO
2
charger
has not been pier
ced
•
A genuine Cuisinart Single-Use Recyclable CO
2
Char
ger – Power
ed by SodaSparkle™ has not
been used.
•
The CO
2
char
ger has not been pr
essed firmly into place
until a click is hear
d, or has been loaded at an angle.
•
The carbonator head has not been scr
ewed firmly onto
the bottle.
•
The char
ger chamber has not been scr
ewed firmly
down onto the carbonator head.
•
The pier
cing unit inside the carbonator head has been
damaged (in this case please send the complete unit in for service to an authorized Cuisinart service agent).
W
ater escapes
while carbonating
•
The beverage bottle has been filled above the “W
ater
Fill Line” indicator
.
•
The carbonator head has not been scr
ewed on tightly
.
•
The carbonator head has been unscr
ewed befor
e
carbonation is complete.
•
The unit has been held at an angle while carbonating.
•
Mor
e than one CO
2
char
ger has been used to carbonate
the same bottle contents (double-carbonating).
•
The char
ger chamber and carbonator head have been
unscr
ewed too soon.
The water does
not carbonate or
har
dly carbonates
•
No CO
2
char
ger has been inserted into the char
ger
chamber
.
•
A used (empty) CO
2
char
ger has been used. An empty
CO
2
char
ger will have a hole at the tip wher
e it was
pier
ced.
•
The water used for carbonation was not cold enough.
•
The unit has been used r
epeatedly in a very short
period of time. Rinse the carbonator head in warm water for 30 seconds and r
euse.
It is dif
ficult or
impossible to insert
or r
emove the
CO
2
charger
•
The CO
2
char
ger may be incompatible. Use only
Cuisinart Single-Use Recyclable CO
2
Char
gers –
Power
ed by SodaSparkle
®
.
•
The safety window is not fully open. Use the toggle to open the safety window completely
.
•
The char
ger chamber is still scr
ewed down onto the
carbonator head. Unscr
ew and r
emove completely to
enable insertion or ejection of the CO
2
char
ger
.
For Best Results •
Use only chilled water for carbonation.
•
Always fill bottle to maximum fill indicator line, never overfill.
Caution •
Never fr
eeze the bottle or its contents.
•
Do not double-carbonate. Carbonate only once.
CLEANING AND MAINTENANCE
Hand-wash the 1-liter beverage bottle, carbonator head and charger chamber in warm, soapy water [maximum temperature: 122°F (50°C)]. Use any liquid dishwashing detergent. DO NOT use any product containing ammonia or scouring powders, as these could dull, scratch or mar the unit and its contents. Never wash any components in the dishwasher
.
Maintaining your charger chamber and carbonator head •
Store the system components in a clean, dry place.
•
If the system has not been used for an extended period of time, rinse all components with warm water prior to use.
Maintaining your beverage bottle •
The beverage bottle, designed for your Compact Sparkling Beverage Maker, is uniquely threaded to fit only this unit. Use only the Cuisinart beverage bottles specified for use with the Compact Sparkling Beverage Maker – Powered by SodaSparkle™. The attempted use of other beverage bottles will damage your product.
•
Always check your beverage bottle and cap before each use. If you discover that the bottle or cap has any defects, such as a distorted shape, scratches or cuts, or is generally worn down, stop using the defective item and replace it.
•
The beverage bottle and cap are not dishwasher safe (hand-wash only).
•
Do not store near a heat source. Exposure to heat will likely damage your beverage bottle. Do not microwave.
•
Each beverage bottle has an expiration date. Be sure to discontinue use and replace the bottle once the expiration date is reached.
•
Always clean the beverage bottle immediately after each use. Wash the bottle with warm water and any liquid dishwasher detergent; rinse thoroughly.
•
Carbonate cold water only.
•
Never store bottle in the freezer.
Maintaining your disposable CO
2
chargers •
The Cuisinart Single-Use Recyclable CO
2
Chargers – Powered by
SodaSparkle™ are designed specifically for the Cuisinart Compact Sparkling Beverage Maker. These chargers are uniquely made to fit our system and are the only chargers that should be used when carbonating water with your Compact Sparkling Beverage Maker System.
•
Please follow all safety instructions.
•
Never tamper with the CO
2
chargers.
Doing so could result in severe injury.
•
Store only in a cool place that is not subject to frequent temperature changes or high temperatures. If subjected to heat, the pressure inside the charger will rise.
•
Exercise caution when handling the used CO
2
charger, as it may be cold.
•
Do not transport your Compact Sparkling Beverage Maker while the CO
2
charger is in the unit.
•
Do not expose to direct sunlight or temperatures in excess of 122°F (50°C).
TROUBLESHOOTING