Brushed Stainless Steel
Oval Wall Cookware Rack
Model CROW-25B
Beautifully display Cuisinart
®
Cookware and
keep it within easy reach. This Cuisinart
®
Brushed Stainless Cookware Rack eliminates the
need to bend down to stack and store cookware
in cupboards. The solid brushed stainless rack is
easy to install and designed to last a lifetime.
Enclosed you will find everything needed for the proper assembly and use of your cookware rack. The parts and
hardware included are:
1 - Oval Wall Base
1 - ½" Nut
2 - 2½" Lag Screws with Washers
1 - Mounting Arm
1 - Lock Washer
6 - Angled Pot Hooks
1 - Sheetrock Anchor
1 - Sheetrock Anchor Screw
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Please proceed carefully using the following instructions to ensure this rack is assembled properly for safe
installation and use and without damage to the finish. Haste in assembly could result in needless scratching
or marring of the stainless steel finish.
1.
Unwrap rack and mounting arm from plastic covering.
2.
Attach the arm to the rack body, using the lock washer and ½" nut. Tighten securely.
3.
Identify mounting location and ensure at least the two base mounting holes are located directly over wall studs
(wood studs).
4.
Position rack assembly in desired location and mark fastening locations for base and mounting arm using rack
holes provided.
5.
Drill mounting holes and mount rack according to your situation:
a. For all-wood installation
i. Drill three holes as marked using a
7
⁄
32
" drill bit (not provided).
ii. Hold rack in position (you may want assistance during this step) and fasten base to wall first using the
2½" lag screws and washers provided. Tighten securely.
iii. Finish by securing the mounting arm with the third 2½" lag screw and washer, tighten securely.
b. For wood and sheetrock installation
i. Ensure base mounting holes are located over wood wall studs.
ii. Drill base mounting holes as marked using a
7
⁄
32
" drill bit (not provided).
iii. Drill mounting arm hole as marked using a
3
⁄
8
" drill bit through sheetrock and install provided sheetrock
anchor.
iv. Insert small washer on screw first, then larger washer second. Pass through bracket mounting hole
and attach anchor to screw.
WARNING:
PLEASE READ ALL INSTRUCTIONS
BEFORE ASSEMBLING AND INSTALLING
YOUR NEW COOKWARE RACK
Rack Size: 27½" Length x 10" Width x 15" Height
OVER PLEASE
Mounting Arm
Anchor
Base
½" Nut
Pot Hooks
Sheetrock Anchor Screw
Lock Washer
2½” Lag Screws
with Washers
