2
IMPORTANT SAFEGUARDS
Basic safety precautions should always be followed when using
electrical appliances:
1. Read entire instruction booklet carefully.
2. Do not immerse or rinse motor body, cord or plug in water
or any other liquid.
3. This appliance is not for use by or near children.
4. The unit should be unplugged when not in use, before
putting on or taking off parts, and before cleaning.
5. Do not touch moving parts.
6. Using attachments that are not recommended or sold by the
manufacturer of this appliance can result in fire, electric
shock, or injury.
7. For indoor use only.
8. Keep hands, hair and clothing, as well as utensils, away
from moving parts, discs, and tips while processing, to
prevent the risk of severe injury to persons or damage
to the cookie press.
9. Handle discs and tips carefully when removing, inserting
or cleaning.
10. Lock cover and tube securely in place before operating
appliance. Do not try to remove tube or tube cover while
in use.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
POLARIZED PLUG
To reduce the risk of electric shock, this polarized (one prong
larger than the other) plug will fit into a polarized outlet only one
way. If it does not fit correctly into the outlet, reverse the plug.
If the plug still does not fit, consult a professional electrician.
Modifying the plug in any way will defeat this safety feature and
increase the risk of injury.
SHORT POWER CORD
To reduce the hazards resulting from a longer cord, a short
power-supply cord is supplied. If desired, use an extension cord
and make sure the marked electrical rating is at least as great as
the electrical rating of the appliance. The extension cord should
not hang over the counter or tabletop where it could be tripped
over or pulled on.
BEfORE fIRST TImE USE:
1. Unpack the cookie press and all accessories with care.
2. Wash cookie discs, pastry tips, pastry tip adapter, tube
cover, pastry tip cover, tube, shaft adapter, press disc and
shaft with warm, soapy water. Rinse and dry completely.
3. Wipe all surfaces of the motor body with a slightly
moistened, soft cloth and dry thoroughly. MAKE SURE
THE UNIT IS UNPLUGGED.
4. Never immerse the motor body, plug or cord in water or any
other liquid, and do not use steel wool, scouring pads or
abrasive cleansers as they will damage the finish.
5. Dry all parts completely to ensure that no water enters the
motor body.
GETTING TO KNOW YOUR
ELECTRIC COOKIE PRESS
ASSEmBLY INSTRUCTIONS
1. Place the shaft adapter onto the motor body and turn slightly
to align the arrows (see Figure 1).
2. Insert the stem of the shaft into the shaft adapter center
hole. Push the shaft completely inside the unit and press
firmly into place (see Figure 2). The outside contours of the
discs on the shaft and the shaft adapter should line up.
3. Choose your preferred disc and place it inside the tube
cover. Place the tube cover onto the tube and turn clockwise
until it locks in place (see Figure 3).
If you are using a pastry tip, refer to Figure 4. Put the desired
tip over the pastry tip adapter and secure with the pastry tip
cover. Put the pastry tip assembly into the tube cover, place
the tube cover onto the tube and turn clockwise to a locked
position.
