4
5
BEFORE THE FIRST USE
Carefully unpack the unit and remove any packag-
ing and promotional labels in or on the sterilizer.
Rinse all accessories thoroughly with warm soapy
water.
OPERATION
Before you begin sterilizing, thoroughly wash all
bottles and feeding accessories in warm soapy
water or in the dishwasher.
1. Remove the measuring cup from the
sterilizer lid by popping it up from the
bottom edge.
2. Lift off the sterilizer lid and set it aside.
3. Fill the measuring cup with water to the
fill line on the side of the measuring cup
(100mL), then pour it into the sterilizing
chamber.
NOTE
: DO NOT EXCEED the
recommended amount of water.
4. Slide the stem through the lower tray to
assemble, then place them in the sterilizing
chamber.
5. Place the bottles neck downward into the
designated areas on the lower tray.
Note
:
The tray hold up to 6 of the largest bottles
available.
6. Lift the upper tray by the center post in the
middle of the tray and slide it over the stem
attached to the lower tray in the steaming
chamber.
7. Loosely scatter the unassembled
components on the upper tray.
(It is important that all bottle parts are
disassembled before adding them to the
upper tray for proper sterilization).
8. Replace the measuring cup in the sterilizer
lid and then place the lid on top of the
sterilizing chamber.
9. Turn the dial to ON and the LED light will
illuminate to indicate the sterilizing has
begun. The unit and the LED light will shut
off automatically once sterilizing is complete.
Turn the dial to the OFF position.
Caution
: Hot surface. Avoid contact. During
use, never touch the base, the lid or the lid
handles.
10. Allow the sterilizer to cool for 10 minutes
before opening, and wash your hands
thoroughly before handling the sterilized
items.
11. Carefully remove the sterile contents by
lifting up from the stem sticking through the
upper tray. Use caution when removing, as
the items will be hot.
NOTE
: The contents will remain sterile for up
to 24 hours if the sterilizer is unopened.
12. To help prevent a buildup of calcium in the
unit, drain and rinse the unit after each use.
To empty the unit of excess water, wait until
the unit has cooled, then tip the unit onto its
side over the sink and any extra water will
come out.
7.
9.
11.
10.
12.
8.
1.
3.
5.
6.
4.
2.
