10
11
AssEMBLY instRuCtions
AssEMBLY instRuCtions
11
10
9
a. Attach the left shelf fascia (DB) to the left side shelf
table (DA).
b. Attach the Infrared Zone lid (DF1) to the left side
shelf table (DA).
c. Remove the hardware from the infrared support
frame (DC). use the hardware to assemble the
infrared wind shield (DJ) onto the infrared sup-
port frame (DC).
dA
dA
Front
*
A
B
tiP: To position the left side shelf assembly, insert
the two hooks on the side shelf assembly into
the two openings located on the upper left side
panel (BB).
Assemble the left side shelf assembly to the cart
assembly, as shown in figure B.
Please note: It is recommended that a 3 ½” Phillips
screwdriver be used in this step, and that the
assembler positions themselves at rear of the side
shelf, to complete assembly.
BB
Remove the hardware that is pre-assembled to the
side burner valve bracket(CC), as shown in figure
A. Insert the side burner valve stem through the
rear of the left side shelf fascia(DB). Assemble the
side burner valve (cc) to the side shelf fascia (DB),
using the hardware removed.
Assemble the side burner control knob (#12) to
the side burner valve (CC).
Hardware may be included with the hardware
pack.
CC
A
8
8
7
7
6
6
YOu wILL NEED:
YOu wILL NEED:
6
15
7
16
8
17
18
X 3
X 4
X 3
X 4
X 3
X 4
X 4
YOu wILL NEED:
A
A
B
B
B
B
B
2
3
4
4
5
5
X 1
X 1
X 1
X 4
X 4
X 4
YOu wILL NEED:
12
X 1
dC
dA
dFi
dJ
dF1
dB
12
B
CC
dB
dA
dB
