date
page
10/2010
3 of 13
20050 SW 112
th
Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2380 www.cui.com
PART NUMBER:
DESCRIPTION:
AMT203
DEMO KIT USER GUIDE
© 2010 CUI Inc. All rights reserved.
Information in this document is subject to change without notice.
ABS ENCODER MENUS
This section discribes the use of the LCD Display and pushbuttons for the ABS encoder. Most operations can be
performed from this interface, however the USB interface is more useful for automatic testing.
NO CONNECT
Figure 2 shows the display when there is no encoder attached. The version is shown as V11. The firmware can be
updated using a Microchip PIC programmer such as the PICkit 2.
POSITION: DISPLAY AND SELECTIONS
The POSITION: Display is shown in Figure 3. Pressing any of 3 buttons for 1/4 second will result in action. The fol-
lowing actions apply:
• CONF
: go to the next Display Menu (page 3)
• PROG
: go to the menu to program the encoder (page 5)
• DemoBd
: read eeprom settings in AMT-DMDB memory (page 6)
Figure 2: Startup with no encoder attached
Figure 3: Startup with encoder attached
