6.Fitting the tray
. Position the tray over the arms and pull the side levers found on the
to the position required.
. The tray has three positions as indicated on the arm rests. Line the tray
- Never leave the tray fitted in a position where the warning
. To remove the tray, pull outwards on the side levers (a) found on the
. The top tray can be removed by holding and pulling at the ridge (b)
. To replace the tray again, position the top tray over the bottom tray
. The tray may be stored on the back legs of the highchair. Align the
underside of the tray (a) in an outwards direction, whilst sliding the tray
into the desired position then release the lever into the lock position.
In the case the tray is not automatically locked onto the armrests, move
the tray slightly until you hear a double click , this signals the tray is
securely locked.
WARNING!
signs are visible.
underside of the tray and remove.
whilst simultaneously lifting the other ridge (c).
and push down.
holes in the rear of the tray with the small pegs on the back legs.
a
c
b
6
