ENGLISH
3
1. Initiate Bluetooth pairing on the host device such as a phone or tablet (Bluetooth 4.0 or higher)*
2. Start Bluetooth host pairing on the keyboard, up to three devices can be paired (see below)
3. Input the code from the Bluetooth device screen on the keyboard if requested
4. When pairing completes, the wireless indictor (D) turns solid blue/cyan/magenta for 3 seconds
CONNECTING VIA
BLUETOOTH
WIRELESS
NOTE: Wireless modes can be switched to at any time by pressing a wireless shortcut. Pressing the same
shortcut again will switch back to USB wired mode.
CONNECTING VIA USB WIRED
1. Connect the keyboard via USB cable to a USB 3.0 Type-A port or better
2. The keyboard will automatically switch to USB wired mode
3. Go to iCUE device settings to select up to 8,000Hz hyper-polling with
CORSAIR AXON*
*Polling rates higher than 1,000Hz are not support by Xbox or PlayStation consoles.
*Bluetooth host device must support standard keyboard HID input.
SHORTCUT
FUNCTION
STATUS
INDICATION
INDICATOR
FN +
(Press)
Switch to Bluetooth host 1 mode
Connected
Solid Blue (3 sec)
Disconnected
Pulsing Blue
FN +
(Hold)
Start Bluetooth host 1 pairing*
Pairing
Blinking Blue
FN +
(Press)
Switch to Bluetooth host 2 mode
Connected
Solid Cyan (3 sec)
Disconnected
Pulsing Cyan
FN +
(Hold)
Start Bluetooth host 2 pairing*
Pairing
Blinking Cyan
FN +
(Press)
Switch to Bluetooth host 3 mode
Connected
Solid Magenta (3 sec)
Disconnected
Pulsing Magenta
FN +
(Hold)
Start Bluetooth host 3 pairing*
Pairing
Blinking Magenta