Cuckoo CRP-L10 Fuzzy Series, Инструкция по эксплуатации

Страница: 22 / 54

Using
range of
preset
timer
From
(38minutes
+ My mode)
to 13 hours
From
45minutes
to 13 hours
From
(55minutes
+ My mode)
to 13 hours
From
(56minutes
+ My mode)
to 13 hours
From
(48minutes
+ My mode)
to 13 hours
From
93minutes
to 13 hours
From
65minutes
to 13 hours
From
(39minutes
+ My mode)
to 13 hours
From
46minutes
to 13 hours
From
(setting time
+1minutes)
to 13 hours
Glutinous Sushi Mixed/Brown GABA Old Rice Porridge Chick. soup Nu Rung Gi Nutritious Multi Cook
Menu
Put rice in the inner pot with the measured water after washing the rice and turn the Lock/Unlock handle to Lock .
Presetting time is the time of completion. (According to the amount of rice the finishing time may vary)
The PRESET COOK will be displayed.
Press the “Cancel” button when you want to cancel the preset cooking.
The preset time will be stored.If you want to cook the rice to the preset time already entered,
press the “Timer” button and then press the “Pressure Cook/Turbo” button.
If you want to check the current time during the Timer cooking, press the “Hrs/Soak” or
“Min/Heat” button for 2 seconds.
If you press the “Timer” button, the “PRESET” sign will be displayed with the preset time.
After pressing “Timer” button, set the preset time within 7 seconds.
The default for set time is 6:30 AM
If you press the “Timer” button without setting the lock/unlock handle on the lid to “Lock”,
the
sign will be on the display and it will not operate.
In GABA mode, preset on is possible.
If the rice is old and very dry, the result of the cooking may not be good.
If the rice is not well cooked increase the amount of water about half-scale.
Press “Cancel” button and restart to change the preset time.
Set the preset time to no more than 13 hours especially if the preset time exceeds 7 to 8 hours during the summer time,
the rice can smell bad.
Preset time will be changed automatically and displays “ when setup time exceeds 13 hours.
If the preset time is shorter than cooking time in the below table, the cooking starts immediately.
Precautions for preset cooking
Using range of Timer Cook for each menu
Refer to page 10 for the time setting method
If the current time is not set correctly, the presetting time also is incorrect.(Make sure not to change A.M. and P.M.)
If the menu is incorrect, press the “Menu” button and select the desired menu.
Set the preset time with the “Hrs/Soak” and “Min/Heat” button.
If the preset time is already correct, you do not need to set time again.
Example) When you want to eat the rice at 7:40AM, press the “Timer” button (The “PRESET”
sign will be displayed) and then press the “Min/Heat” button, set time at 7 hours. And
press the “Min/Heat” button, set time at 40 minutes. (The unit for the “Hrs/Soak”
button is 1 hour and the unit for the “Min/Heat” button is 1 minute.)