Cuckoo CRP-JH06 Fuzzy Series, Руководство по эксплуатации, Страница: 28 / 34

HOW TO USE POWER SAVE/
ENERGY EYE FUNCTION
▶
When ‘CANCEL’ button is pushed for 3
seconds at waiting state, Saving power
function is set up.
▶
Method 1) Push any button then it will be returned to
waiting mode.
Method 2) If lid handle is turned to open or close, power
saving mode will be canceled and back to
waiting Mode.
1. If you push ‘MODE’ button 9 times at the standby state, automatic power saving mode is set up.
(‘MODE’ button needs to be pressed for over 0.3 second at the first time.)
2. After doing your desired setting, if you press the SET button, the setting will be saved.
3. If you press the CANCEL button or 7 seconds have passed without any button’s being pressed, the function will be canceled.
1. Press the ‘MODE’ button 13 times in standby status and you will enter the Energy Eye mode.
(‘MODE’ button needs to be pressed for over 0.3 second at the first time.)
2. Each time you press the ‘SELECTION’, the Energy Eye shifts from OFF to Step 1 to Step 2 to Step 3.
When OFF is displayed, a voice comes up saying “The Energy Eye function is canceled”.
3. After selecting your desired step, press the SET button to save the set value.
4. If you press the CANCEL button or 7 seconds have passed without any button's being pressed, the function will not
be set but canceled.
(When selecting Energy Eye function) (When deactivating Energy Eye function)
▶