Cuckoo CRP-HF06 Fuzzy Series, Руководство по эксплуатации

Страница: 25 / 52

Case Check points Do the following
When the rice is
not cooked.
When the rice is
not well cooked.
Bean (other
grains) is half
cooked.
Rice is too watery
or stiff.
When the water
overflow.
When you smell
something while
warming.
Did you use the measuring cup to
measure your rice?
Did you measure proper water?
Did you clean the rice before cooking?
Did you put rice in water too long time?
Is the rice old or dry?
Is bean (other grains) is too dry?
Is it selected the menu correctly?
Did you measure proper water?
Did you open the top cover before
cooking was finished?
Did you use the measuring cup?
Did you measure proper water?
Is it selected the menu correctly?
Did you close the top cover.
Please check the power cord input to
wall socket.
Did it warm over 12 hours?
Is there any other substance such as
rice scoop or cold rice.
Refer to page 11~12.
Insert some more water (about half of 1 level)
Soaked or steam beans other grains
before cooking in the pressure cooker in
order to avoid partially cooked beans or
grains. Beans should be soaked for-to-
minutes or steamed for-to-minutes prior
to cooking, depending on your taste.
Select the correct menu.
Measure the proper water.
Open the top cover after cooking
finished.
Refer to page 11.
Close the top cover perfectly.
Always be keeping the power on while
warming.
As possible as warming time is within
12 hours.
Don’t warm rice with other substance.
“Pressure Cook/Turbo” button is pressed?
Is there power cut while in cooking?
Press the “Pressure Cook/Turbo” button once.
And check
sign on the display.
Re-press the “Pressure Cook/Turbo” button.
Clean all the alien substance on the
temperature sensor, heating plate or the
bottom surface of the inner pot. Is there any rice or any other alien
substance on the temperature sensor,
heating plate or the bottom surface of
the inner pot?
When the rice is
badly sticky.
“ ”,“ ”,
“ ”sign is
appeared.
There is some problem on the
temperature sensor. Please contact to dealer or service center.
Please insert inner pot.
120V only.
Please turn the Lock/Unlock Handle to
"Lock"
Is there inner pot?
Check the rated voltage?
Did you turn the Lock/Unlock Handle to
"Lock"
Is “pressure” lamp on?
When the button
cannot operate
with “ ”.
When the “Pressure
Cook/Turbo”, Timer
button are not
operate with “ ”
If there is a problem with your cooker, check the following details before requesting service to your
dealer. Sometimes the cooker may not operate as desired if used incorrectly.