Cuckoo CAC-J1510FW, Руководство пользователя

Страница: 8 / 20

Please confirm that the input voltage is 100-240V, 50Hz/60Hz, and ensure that the power plug
and your hands are dry before you insert the power cord plug into the outlet.
Note: Contact Customer Service when the power cord or plug is damaged or
the power outlet is loose.
We strongly recommend that the damaged parts be repaired or replaced.
To replace the damaged power cord or plug, please visit CUCKOO website and contact
Customer Service.
Connect the power
3. M Mode (Moderate)
When the machine works in a M Mode, the corresponding indicator
will be on.
4. Mode (Sleep)
The lowest and quietest fan speed. After this mode has been on for
5 seconds, the lighting will be dimmed.
The sleep Indicators will be on again and touching any button.
Light / Child lock Button
There are three different light brightnesses you can control: standard,
dimmed, and off. Push the light button repeatedly until you reach your
desired brightness preference.
(Note : You cannot change the light brightness while the air purifier is
assessing the air quality the first 30 seconds the machine turns on.)
To child safe lock, press and hold the light button for 3 seconds until the lock
icon shows. To unlock, press and hold for 3 seconds until the lock icon
disappears.
(Note : Any functions cannot operated in the mode of Child lock function
unless you long press this button to unlock it.)
Names and Functions of Control / Display Panel
8
Timer Button
1. To use the timer, press the timer button until you reach desired timer
time.
You can select between 2 hours, 4 hours, or 8 hours.
2. When the timer is up, the air purifier will turn off the fan and all lights
and be on standby mode.
UV LED / Filter Change Button
1. UV LED uses light to help sterilize and kill the bacteria in the air. To turn
on the UV LED, make sure the air purifier is on, press the UV LED button
and the UV LED will turn on. To turn off the UV LED, press the UV LED
button again.
*NOTE* Please do not stare into the UV LED light, this may cause visual impairment.
2. Filter Change Button: After your air purifier has been running for 2200
hours or if it detects the filter is saturated before the 2200 hours, the filter
indicator will flash red. After replacing the filter, press and hold the Filter
Change Button for 7 seconds or until the light stops flashing.
This will reset the system to adapt for the new filter.