Cuckoo AC-12ZH10F, Руководство по эксплуатации

Страница: 19 / 84

Details To Check before Use
19
w
w
w
.c
u
ck
o
o
w
o
rld
.c
o
m
E
N
G
L
IS
H
Details to Check before Use
Take out the Filters and remove the packaging vinyl.
▶
Remove the packaging vinyl of Filters excluding the Pre-Filter, and assemble them onto
the product according to the assembly sequence of the Filter.
▶
Assembly sequence of Filters :
HEPA Filter
→
Deodorization Filter
→
Pre-Filter.
(Refer to the Air Purifying Filter System on page 18.)
2
Connect the power supply.
▶
This product is exclusively for 120V~, 60Hz.
Please connect the product to the exclusive
Power Outlet.
4
Press the ON/OFF button to turn ON the power,
press the Mode button to set the desired operation
mode.
5
When you want to stop the product, press the ON/OFF button again.
▶
During the Air Purification operation, the Fan will work for about 10 seconds and then stop.
▶
All the lights of the Display Panel will be turned OFF.
6
120
Reassemble the Filter Cover onto the product.
▶
When reassembling the Filter Cover, prevent your body
parts and materials from being stuck in.
3
Open the Filter Cover.
▶
Open the Filter Cover by pulling the upper part
of each side of the Filter Cover.
※
If you hold the bottom of the Filter Cover and pull it
excessively, it may cause a damage to the product.
1
When you do not use the product for a long time, pull out the Power Plug.
This product is exclusively for 120V~, 60Hz. Put the Power Plug in the exclusive Power Outlet.
Caution
➡