SHOT OF STEAM
•
Set the temperature control dial(1) to the “MAX” position.
•
By pressing steam button(6) an intense shot of steam is emitted from the
soleplate(Fig.6.).
Fig.6
This can be very useful e.g. when removing stubborn creases. The shot of
steam facility can be used only while ironing with high ironing temperature
(positions
• •
or
• • •
or “MAX”)
VERTICAL STEAM
•
Set the temperature control dial(1) to the
“MAX” position.
•
Stand the iron on its rear side.
•
Wait a little while for the soleplate temerature
to stabalize.
•
Hold the iron vertically and press the steam
button(6), an intense vertical steam will be
emitted from the soleplate(9)(Fig.7.).
Fig.7
This can be very useful e.g. when removing stubborn creases. The shot of
steam facility can be used only while ironing with high ironing temperature
(positions
• •
or
• • •
or “MAX”)
DRY IRONING
•
Insert the mains plug into the wall socket.
•
Ensure that the steam dial(4) is in position “MIN”.
•
Select the setting on the temperature control dial(1) best suited for the fabric
to be ironed.
•
Wait a little while for the soleplate temerature to stabalize.
SAFETY PROTECTIVE CUT OUT
In the unlikely event of the thermostat failing, the protection cut-out will operate
to prevent the iron overheating. The iron should then be taken to an authorised
repairer.
5
CU-2688 inst/2.qxd 13/7/05 12:32 PM Page 6
