Use and operation
24
EN-US
Cubusan CP120
5.3 Site selection
For optimum operation of the device, an ambient temperature of 18°C bis 24°C at medium dust concentration is
recommended. Recommended room size for the CUBUSAN
120 m3 (corresponds to approx. 50 m2 at 2.5 m room
height)
.
n
Place the device on a stable surface and at a minimum distance of 15 cm from the nearest vertical surface, such as
a wall or cabinet with sufficient air supply.
n
Do not position the device directly next to a stove, a heater, or near a window with direct sunlight.
n
The device must not be operated outdoors or in explosion-risk areas.
n
Do not position the device near a humidifier.
n
A suitable mounting plate is required for wall or ceiling mounting. If desired, this can be obtained from WINTER-
STEIGER.
n
Do not use the device within reach of children. The device must be at least 1 meter above the floor.
n
Before moving the CUBUSAN , unplug the power adapter.
The best result is achieved when the CUBUSAN is placed centrally in the room. The more
centrally the CUBUSAN is positioned, the more even the distribution.
For high rooms, rooms over 120 m³ , or rooms with strong ventilation, the use of several
air purifiers may be necessary. We recommend discussing this with the manufacturer.
The air exchange per hour should not be more than 4 times the air in the room.
5.4 Operation
The CUBUSAN has several openings/slits for the air inlet/air outlet, which must not be covered under any
circumstances. Make sure that none of these openings are covered during installation. Keep a distance of
150 mm between the openings and any objects on all sides so that the device can blow out air freely.
1.
Plug the cable of the power adapter output into the bottom of the CUBUSAN CP-120 and the power adapter into an
outlet
(see chapt. Commissioning, page 23)
.
2.
The fan in the device starts to work and sucks in air, which is disinfected and freed from odors with the help of the
STEREX technology. The decorative lighting on the corners of the CUBUSAN CP-120 lights up permanently.
3.
Unplug the device as necessary.
The power supply to the CUBUSAN CP-120 can only be completely disconnected by pulling out the power adapter.
Ideally, plug in the device at least 1 hour before you want to disinfect the air.
A smell of freshness can be detected when the device is being properly operated.
