For assembly advice or parts email [email protected] or call 0800 710 1010
STEP ONE:
Remove the drawers/door from the unit. Also remove any white cover stickers from the
inside of the cell you are about to put the unit into.
STEP TWO
:
Insert the unit into the Cubo frame until the back edge of the unit is flush with the back edge
of the shelf.
STEP THREE:
Use the gold screws provided to screw into place. Guide holes are pre-drilled, these may
take a bit for force to screw into the Cubo frame.
STEP FOUR:
Replace the drawers/door back into the unit. Unscrew the handles(s) from the rear face of
the drawers/door and re-screw them on the front face.
CONGRATULATIONS, your CUBO insert unit is now complete.
THANK-YOU FOR SUPPORTING NEW ZEALAND MADE FURNITURE
