Cubix HostEngine 4U, Руководство пользователя, Страница: 4 / 8

Cubix Corporation

2800 Lockheed Way

Carson City, NV 89706-0719

Page 4
Sales 800.829.0550

http://www.cubix.com

sales@cubix.com

host-engine-4u- x10drg-q-20151211

Wait for the power to shut off.

Disconnect power and all other cables from HostEngine.

Loosen the two retention screws on the HostEngine front panel.

Gently tug the HostEngine handles toward you.

Extract the HostEngine while supporting its weight.

Slide the replacement HostEngine into the rack mount slide mounts.

Slide HostEngine into the cabinet.

Replace and tighten the retention screws.

Connect power and all other cables to HostEngine.

Power up HostEngine.
Remove and replace PCIe devices
PCIe devices can be removed and replaced from the top once you power down HostEngine and
remove the cop cover. See the image below for the PCIe devices to install in each slot.

Power down gracefully using the OS and wait for the power to turn off

Loosen the two retention screws on the HostEngine front panel.

Gently tug the HostEngine handles toward you.

Remove the screws holding the top cover and set it aside.

Disconnect auxiliary power cables from the PCIe devices such as accelerators, if needed.

Remove / replace the PCIe devices and re-connect the drive power and data cables.

Replace the top cover and its retaining screws.

Slide HostEngine into the cabinet.

Replace and tighten the retention screws.

Power up HostEngine.