Cubic 156-PMD, Руководство по эксплуатации

Страница: 17 / 25

2-3 Disassembly and Repacking.
fo I I ows :
To disassemble the equipment for storage in the carrying case proceed as
(1) If the carrying strap is attached, unhook it at top and bottom.
(2) Collapse the long handle, using the same procedure as for handle extension
but in reverse order, starting at the bottom collet (smallest diameter)
(3) Detach long handle from the short handle by pushing down and twisting
(4) Remove the battery pack from the control box. (See paragraph 2-1
the coupling 1/4 turn counterclockwise.
(5) Place each item into the compartment allotted to it in the carrying case
(figure
(6) Close the carrying case. The top section should fit on evenly and snugly
without forcing; if it does not, check for proper placement of the contents, fouled cables
etc.
(7) Secure the six latches.
(8) Close the air pressure relief valve.
2-7