Cube Mountain Bike, Инструкция по сборке

Страница: 10 / 16

Assembly Manual Mountain Bike
10
Fig. 22 Fig. 23
V. Adjusting the handlebars
Using the multifunctional tool (Fig. 24)
Select the correct Allen key to loosen the stem locking screws
on the handlebars (Fig. 25)
Make the necessary adjustments to your handlebars.
Make sure that the handlebars are centrally aligned in the stem
clamp (Fig. 26)
Once you have adjusted the handlebars, tighten the locking
screws on the front cross-wise
Fig. 24 Fig. 25 Fig. 26
Attention: Make sure that there is an even tightening torque
on all of the stem locking screws. The clearance of the stem
clamp has to be identical, otherwise there is a risk of a serious
material defect on the handlebars!
VI. Fitting the saddle
Insert the seat pin into the seat tube and adjust
the height of the saddle (fig. 27)
Fig. 27 Fig. 28