8
See step 2.1.2, then use
arrow key to browse.
Press
“OK” key to enter.
See step 2.1.2, then use
arrow key to browse.
Press
“OK” key to enter.
Use the arrow key
s
to browse. Press
“OK”
key at each character to
enter the ID, then select
Duplicate and press “OK”
key.
Please check if O.E
sensor ID is Hexadecimal
(0~9+A~F) or Decimal
(0~9) to select correct
mode in Manual
Duplicate.
An instruction message
will be displayed during 4
seconds, then will
automatically disappear
2.1.2.2 AUTO DUPLICATE
DIAGNOSE: If there is no existing data, diagnose all sensors that you wish to duplicate at
the beginning
DUPLICATE: Will be enabled when at least one sensor is diagnosed. Select it and press
“OK” to duplicated all previously diagnosed sensor.
PROGRAMMING: a shortcut to the Programming menu.
SAVE: To save the existing data to SAVED VEHICLES menu (will be enabled when there
is existing data, see page XX).
2.1.2.3 MANUALLY DUPLICATE
