manualshive.com logo in svg

Cub Cadet Z-Force 54-KH, Руководство оператора

Поделиться
Скачать
Cub Cadet Z-Force 54-KH Скачать руководство пользователя страница 22

22

s

ectiOn

 6— M

aintenance

 & a

djustMents

Number of Oil Points

Description

DAILY

4

Deck Suspension Pivots

4

Height Adjustment Turnbuckle Clevis Pin

2

Height Adjustment Handle Pivots

2

Height Adjustment Stop Pivots

2

Deck Lift Linkage Pivots

2

Transport Handle Pivots

1

Transport Handle Pin

2

Deck Frame Up-and-Down Pivots

WEEKLY

1

Seat Hinge

2

Steering Lever Linkage Rod End Bearings

2

Lever Return Assembly Rod End Bearings

2

Pump Control Lever Pivots

2

Grass Collection System Lid Hinges (If Mower is so equipped)

Number of Grease Fittings Description

EVERY 25 HOURS

3

Blade Spindle Bearings

WEEKLY

2

Front Caster Wheels

2

Front Caster Wheel Spindles

2

Mower Deck Ball Wheels

Number of Grease Points

Description

WEEKLY

4

Mowing Deck Pivots

2

Deck Take-Up Idler Pivots

OIL CHART

Apply a few drops of SAE engine oil, grease, or use a spray lubricant. Apply the oil to both sides of pivot points. Wipe off any excess. 

Start engine and operate mower briefly to insure that oil spreads evenly.

LUBRICATION CHART

Use a grease-gun filled with NO. 2 Multipurpose Lithium Base Grease 

Engine Oil

:  Rimula 15W40 recommended or 10W40 engine oil rated SJ or higher.

Hydrostatic Fluid

:  Rimula 15W40 recommended.

Spindle Lubricant

: Use only Shell Alvania RL 2 grease.  This grease is an amber-colored grease designed for high speed bearing 

applications.  It has a base oil viscosity that reduces running losses, has been formulated for low noise, has excellent corrosion 

protection, and has excellent bearing lubrication.

General Purpose Lubrication

: Use any NLGI grade 2 multi-purpose grease.  Shell Albida EP2 is recommended.  Shell Albida EP 2 

is a red-colored multi-purpose grease designed for heavy-duty bearing applications.  It has high base oil viscosity for mechanical 

stability, has been formulated for high load, low-speed applications, and has excellent lubrication and corrosion protection.

Содержание Z-Force 54-KH













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды