manualshive.com logo in svg

Cub Cadet CC25GHT, Руководство оператора, Страница: 16 / 22

Поделиться
Скачать
Cub Cadet CC25GHT Скачать руководство пользователя страница 16

TROUBLESHOOTING

C A U S E

A C T I O N

1. Incorrectly gapped spark plug

1. Clean/gap or replace plug

2. Plugged spark arrestor

2. Clean or replace spark arrestor

3. Dirty air filter

3. Clean or replace air filter

C A U S E

A C T I O N

1. Incorrect carburetor mixture adjustment setting

1. Have carburetor adjusted by a Cub Cadet or other        

qualified service dealer

2. Old or improperly mixed fuel

2. Drain gas tank (see Storage) add fresh fuel mixture

3. Air filter is plugged

3. Replace or clean the air filter

4. Fouled spark plug

4. Replace or clean the spark plug

C A U S E

A C T I O N

1. Incorrect starting procedures

1. Follow instructions in the Starting/Stopping section

2. Incorrect carburetor mixture adjustment setting

2. Have carburetor adjusted by a Cub Cadet or other      

qualified service dealer

3. Fouled spark plug

3. Clean/gap or replace plug

4. Empty fuel tank

4. Fill fuel tank with properly mixed fuel

5. Primer bulb was not pressed enough

5. Press primer bulb fully and slowly 10 times

UNIT WON’T START OR STARTS BUT WILL NOT RUN

UNIT STARTS, BUT ENGINE HAS LOW POWER

ENGINE HESITATES

NO POWER UNDER LOAD

C A U S E

A C T I O N

1. Fuel filter is plugged

1. Replace the fuel filter

2. Incorrect choke lever position

2. Move choke to Position 3

3. Dirty spark arrestor screen

3. Replace spark arrestor screen

4. Dirty air filter

4. Remove, clean and reinstall filter

5. Incorrect carburetor mixture adjustment setting

5. Have carburetor adjusted by a Cub Cadet or other quali-

fied 

service dealer

C A U S E

A C T I O N

1. Incorrect carburetor mixture adjustment setting

1. Have carburetor adjusted by a Cub Cadet or other       

qualified service dealer

2. Air filter is plugged

2. Replace or clean the air filter

3. Old or improperly mixed fuel

3. Drain gas tank/add fresh fuel mixture

RUNS ERRATICALLY

C A U SE

A C T I O N

1. Incorrect carburetor mixture adjustment setting

1. Have carburetor adjusted by a Cub Cadet or other        

qualified service dealer

2. Incorrect fuel mixture

2. Use properly mixed fuel (40:1 mixture)

SMOKES EXCESSIVELY

NOTE: 

For repairs beyond the minor adjustments listed above, contact your nearest Cub Cadet Parts & Repair center at 

(1-877-835-7841) or other qualified service dealer for an adjustment.

17

16

SPECIFICATIONS

Engine Type ................................................................................................................................................. Air-Cooled, 2-Cycle

Displacement........................................................................................................................................................................ 25cc
Idel Speed ......................................................................................................................................................... 3600 MAX/RPM
Recommended Maximmum Speed With Cutting Attachment .........................................................................9000-11000/RPM

Ignition Type ................................................................................................................................................................. Electronic 

Ignition Switch ..................................................................................................................................................... Rocker Switch

Spark Plug Gap.......................................................................................................................................... 0.025 in. (0.635 mm)

Lubrication .......................................................................................................................................................... Fuel/Oil Mixture

Fuel/Oil Ratio......................................................................................................................................................................... 40:1

Carburetor .................................................................................................................................................................. with primer

Starter...................................................................................................................................... Power Starting

TM

Starting system

Muffler ............................................................................................................................................................ Baffled with Guard

Fuel Tank Capacity .............................................................................................................................................. 8.5 ozs (250ml)

Blade Leghth.............................................................................................................................................................22” (550mm)

Max. Cutting Thickness.............................................................................................................................................3/4” (19mm) 

Dry Weight ...........................................................................................................................................................13.2 lbs (6.0 kg)

 

Содержание CC25GHT























Отзывы:

Нет отзывов