Cub Cadet 21131509, Руководство оператора, Страница: 12 / 38

12 12
Note: Deflector not shown for clarity but must be installed during normal operation.
Figure 2-12b
Figure 2-12a
2-11 Boot To Mower Deck Installation
NOTE: The Boot Kit Assembly is designed to fit the 54”
and 60” deck. To ensure a snug fit between the boot and
the mower deck, follow the instructions in this step
thoroughly, and remove and tighten all hardware in the
sequence specified.
According to deck size, align marked holes and Boot
holes. Secure the Boot Mounting Assembly P#(A2045)
to the Aluminum Boot P#(E0028A) using (2) 3/8”-16 x 1”
Carriage Bolts P#(K1182) and (2) 3/8”-16 Ny-Flange
Lock Nuts P#(K2038). Insert the Carriage Bolts from the
inside of the Boot so the threads are on the outside of
the Boot (Figure 2-12a). This will prevent grass clippings
from collecting on the bolt threads. Leave bolts loose for
alignment once installed on mower.
After removing only the Wing Knobs, align the threaded
mount posts on the Boot Mounting Assembly with the
mounting holes located above the mowers discharge
chute and insert into the mounting holes. Secure with the
(2) Wing Knobs P#(J0018). Press Boot against
discharge chute, to ensure a snug fit and tighten the two
nuts on top of the boot. Refer to Figure 2-12b.