Cub Cadet 19A70006100, Руководство оператора

Страница: 9 / 20

9 s
ectiOn
4 — a
sseMbly
& i
nstallatiOn
Install the bag support assembly onto the mounting 3.
assembly on the tractor by hooking it over the cross
mounting bracket outside of the two tabs. See Fig. 4-7.
Secure the hanger assembly to the mounting assembly 4.
using a hex bolt (710-3008) and flange lock nut (712-04063)
packed in with the vertical support bracket. See Fig. 4-8.
Install the clevis pin (711-0309A) from hardware pack 2.
689-00097 into the tractor’s hitch and the assembly’s hitch
support and secure with a hairpin clip (714-0117) in the top
hole (closest to the head of the pin). See Fig. 4-6.
Note:
The clevis pin can be fed down through the hitch
support and secured underneath with the hairpin clip, as
seen in Fig. 4-6, or it may be easier to feed the clevis pin up
through the hitch plate hole and secure with the hairpin
clip on the topside. The latter method may be preferred
since it can be easier to insert the hairpin clip. Either way
will work, the decision should be based on operator
preference.
Figure 4-5
Align hole on bracket
with hole on tractor
Figure 4-6
Tabs
Top View
Figure 4-7
Figure 4-8