Cub Cadet 19A30003100 Скачать руководство пользователя страница 20

IMPORTANT:

 To obtain warranty coverage owner may be required 

to present an original proof of purchase and applicable maintenance 

records to the servicing dealer. Please see the operator’s manual for 

information on required maintenance and service intervals.
The limited warranty set forth below is given by Cub Cadet LLC with 

respect to new merchandise purchased or leased and used in the United 

States and/or its territories and possessions, and by MTD Products 

Limited with respect to new merchandise purchased or leased and 

used in Canada and/or its territories and possessions (either entity 

respectively, “Cub Cadet”).
Cub Cadet warrants this product (excluding its

 Normal Wear Parts

as described below) against defects in material and workmanship for 

a period of two (2) years commencing on the date of original retail 

purchase or lease and will, at its option, repair or replace, free of charge, 

any part found to be defective in materials or workmanship.

Normal Wear Parts

 are warranted to be free from defects in material and 

workmanship for a period of thirty (30) days from the date of original 

purchase or lease. Normal wear parts include, but are not limited to 

items such as:  belts, blades, blade adapters, grass bags, rider deck 

wheels, seats, and tires.
This limited warranty shall only apply if this product has been operated 

and maintained in accordance with the Operator’s Manual furnished 

with the product, and has not been subject to misuse, abuse, neglect, 

accident, improper maintenance, alteration, vandalism, theft, fire, water, 

or damage because of other peril or natural disaster. Damage resulting 

from the installation or use of any part, accessory or attachment not 

approved by Cub Cadet for use with the product(s) covered by this 

manual will void your warranty as to any resulting damage. In addition, 

Cub Cadet may deny warranty coverage if the hour meter, or any part 

thereof, is altered, modified, disconnected or otherwise tampered with.

HOW TO OBTAIN SERVICE: 

Warranty service is available, WITH PROOF 

OF PURCHASE AND APPLICABLE MAINTENANCE RECORDS, through 

your local authorized service dealer. To locate the dealer in your area:

In the U.S.A.:

 

Check your Yellow Pages, or contact Cub Cadet LLC at P.O. Box 361131, 

Cleveland, Ohio 44136-0019, call 1-877-282- 8684 

or log on to our website at www.cubcadet.com. 

In Canada: 

Contact MTD Products Limited, Kitchener, ON  N2G 4J1, call 1-800-668-

1238 or log on to our website at www.mtdcanada.com. 
Without limiting the foregoing, this limited warranty does not provide 

coverage in the following cases:

a.  Routine maintenance items such as lubricants, filters, blade 

sharpening, tune-ups, brake adjustments, clutch adjustments, deck 

adjustments, and normal deterioration of the exterior finish due to 

use or exposure. 

b.  Service completed by someone other than an authorized service 

dealer. 

c.  Cub Cadet does not extend any warranty for products sold or 

exported outside of the United States and/or Canada, and their 

respective possessions and territories, except those sold through 

Cub Cadet’s authorized channels of export distribution. 

d.  Replacement parts and\or accessories that are not genuine Cub 

Cadet parts. 

e.  Transportation charges and service calls.
f.  Commercial or Institutional Use.

There are no implied warranties, including without limitation any 

implied warranty of merchantability or fitness for a particular 

purpose. No warranties shall apply after the applicable period of 

express written warranty above. No other express warranties beyond 

those mentioned above, given by any person or entity, including a 

dealer or retailer, with respect to any product, shall bind Cub Cadet.  

The exclusive remedy is repair or replacement of the product as 

set forth above. The terms of this warranty provide the sole and 

exclusive remedy arising from the sale and/or lease of the products 

covered hereby. Cub Cadet shall not be liable for any incidental or 

consequential loss or damage including, without limitation, expenses 

incurred for substitute or replacement lawn care services or for rental 

expenses to temporarily replace a warranted product. 

Some jurisdictions do not allow the exclusion or limitation of incidental 

or consequential damages, or limitations on how long an implied 

warranty lasts, so the above exclusions or limitations may not apply to 

you. 
In no event shall recovery of any kind be greater than the amount of the 

purchase price of the product sold.

 Alteration of safety features of the 

product shall void this warranty. 

You assume the risk and liability for 

loss, damage, or injury to you and your property and/or to others and 

their property arising out of the misuse or inability to use the product. 
This limited warranty shall not extend to anyone other than the original 

purchaser or to the person for whom it was purchased as a gift. 

HOW LOCAL LAWS RELATE TO THIS WARRANTY: 

This limited warranty 

gives you specific legal rights, and you may also have other rights that 

vary in different jurisdictions. 

CUB CADET LLC

MANUFACTURER’S LIMITED WARRANTY 

FOR 

SEPARATELY SOLD ATTACHMENTS AND ACCESSORIES

Cub Cadet LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019, Phone: 1-877-282-8684

MTD Products Limited, Kitchener, ON  N2G 4J1, Phone:  1-800-668-1238

GDOC-100177 REV. A

Содержание 19A30003100





















































Отзывы: