9
Figure 8
Figure 9
•
Insert the lower end of the chute tube over the
discharge chute so that its two notches fit into the
two corresponding notches on the discharge chute.
See Figure 9.
•
Secure by placing the ends of the two short retainer
straps on the discharge chute over the pins on the
chute tube. See Figure 9.
Operation
Your triple bagger kit is a valuable accessory to your
tractor. Optimize its performance by operating
correctly. Do not try to fit it to tractors other than those
specified on page 5.
•
Open the grass bag cover by lifting the cover up.
Do not remove the chute tube assembly from the
tractor.
•
Remove the grass bags by lifting up and moving
the bags away from the support tube assembly.
•
To empty the grass clippings at a proper disposal
sight, use the handle at the bottom of each grass
bag. Holding the bag firmly, empty the contents.
•
Under normal usage, the grass bags are subject
to wear and tear. Check these bags periodically
and wash with water if dirty. Allow to air-dry; do
not apply heat.
Insert chute tube here
Place short
strap here
Place long
strap here
Discharge
Chute