LTE-LINK SE user's Guide
18
Figure 5- 9 CUAV cloud service successfully connected
5.4 Device binding and unbinding
5.4.1 Device binding
After the LTE-LINK SE device is connected to the CUAV cloud server, the user can bind or
unbind the device through the APP software on the CUAV cloud ground terminal. The device
binding step is basically to obtain the CID code of the link device (some software can directly
request binding through the QR code), and then request to bind the link device according to the
device CID code. The user follows the prompt on the link device screen to button, and finally the
CUAV cloud ground terminal APP inquires that the corresponding link device has been bound in
the binding list. The detailed operation steps of the link device are described as follows:
1) Get the CID code of the link device
After the user presses the button for 3 seconds, the QR code of the CID information
will be displayed on the device screen. Refer to Figure 5-10. The user can scan the QR
code on the device screen with the scan QR code function on the mobile device to get
the CID code of the current link device.
Figure 5- 10 QR code interface
Содержание LTE-LINK se
Страница 1: ...LTE LINK SE User s Guide v2 0 0 CUAV TECH INC LTD ...
Страница 4: ...LTE LINK SE user s Guide III ...