C
C
C
T
T
T
X
X
X
Service Manual
S962A
10
6500° K
User
R/G/B select
Adjustment scale
Clock
Adjustment scale
Phase
Adjustment scale
H-Position
Adjustment scale
V-Position
Adjustment scale
Image
Smooth
On/Off
English(select)
German(select)
French(select)
Spanish(select)
Italian(select)
Language
中文
(option)
H-Position
Adjustment scale
V-Position
Adjustment scale
OSD Position
Center
Reset Yes/No
3.6.5 Accessory OSD Indications
Signal out of range
An input signal which is outside the range defined in
Section 3.4 shall cause the monitor to display a message
Signal Out of Range
.
No Signal Input and power down.
When the signal cable is not plugged into PC or when the
horizontal or vertical sync are absent and when the
monitor is turned on. After 5 sec isn’t to detect H or V Sync
then show “
No Signal Input
” for 5 seconds and then show ”
Power
down
” message on screen 2 sec. And then the
monitor shall go to power saving status. If first turn on the
monitor, shows
“No Signal Input”
30 sec.
3.7 Power Management
This monitor will meet the low power specification, Including USA governmental requirements
For Energy Star, the NUTEK standard and the VESA DPMS standard which detected the Hori. /Vert.
Sync signal from host CPU.
A dual color (green/amber) LED is located on the front bezel to indicate the power management
states.
Status
Sync. Video
Power
consumption
Power
management
Picture Recovery time
LED Color
Active Active 43W
max.
On
-
Green
No Sync. Blanked
≦
2W
(Note.1)
Power saving
≦
3 sec
Amber
Note. 1 : Audio function is operating at no signal input.
Once “Esc” or “
△
” or “
▽
” key initiates under power saving condition, the audio function
an be waked up and the power consumption can not be the above definition.
