CTX S720, Руководство по обслуживанию

Страница: 11 / 30

Service Manual
C
C
C
T
T
T
X
X
X
S720
Dec- 2002 - Version 0
-10-
Clock Adjustment Scale
Phase Adjustment Scale
Image
Smoothing On/Off
H-Position Adjustment Scale
V-Position Adjustment Scale
Image Position
Center Adjustment Scale
H-Position Adjustment Scale
V-Position Adjustment Scale
Position
OSD Position
Center Adjustment Scale
English (select)
German (select)
French (select)
Spanish (select)
Italiano (select)
Language
中文 (option)
Reset Yes/No
3.5.5 Accessory OSD Indications
Signal out of range An input signal which is outside the range defined in
Section 3.4 shall cause the monitor to display a message
Signal Out of Range .
No Signal Input and power
down When the signal cable is not plugged into PC or when the
horizontal or vertical sync are absent and when the
monitor is turned on. After 5 sec isn’t to detect H or V Sync
then show “
No Signal Input ” 5 sec, and then show ” Power
down ” message on screen 2 sec.
If first turn on the monitor, shows “ No Signal Input ” 30 sec.
3.6 Power Management
This monitor will meet the low power specification, Including USA governmental requirements
For Energy Star, the NUTEK standard and the VESA DPMS standard which detected the Hori. /Vert.
Sync signal from host CPU.
A dual color (green/amber) LED is located on the front bezel to indicate the power management
states.
Sync Power consumption Power management Picture Recovery time LED Color
On 35W ON - Green
Off 2W Off
≦
3 sec
Amber