4
CONNECTING THE MONITOR
1. Power off the computer.
2. Connect the monitor's signal cable
to the graphic card.
3. Plug in the monitors power cord.
4. Power on the computer, and the
monitor
To remove
1. Squeeze and pull the latches.
2. Pull the Tilt Swivel Base to the rear of
the monitor and lift to remove the
Base.
Turn off the system and unplug all cables
when installing or removing the tilt swivel
base, then carefully set the monitor upside
down.
To install
1. Align the base with the slots in the
bottom of the monitor and insert the
Tilt Swivel Base into the slots.
2. Push the Tilt Swivel Base firmly
toward the front of the monitor until
the latches click into the locked
position.
INSTALLING AND REMOVING THE TILT SWIVEL BASE
